plasmaganses

Health device


An interesting phenomenon was found when the tourmaline is combined with GANS. It can be noted that both the properties of the tourmaline and those of the GANS are greatly amplified by simply combining them. Are put together some black tourmaline beads and GANS (CO2 gans, MgO gans, ZnO gans and amino acids resulting in CH3 GANS production - can also be used with some drops of CuO and CH3 GANS and any kind of GANS from other substances). Can be saw that the far infrared emission and anionic properties of tourmaline somehow is modulated much closer to the biological nature when in contact with GANS, amplifying and balancing the human fundamental field, that lead to healing. Tourmaline is heated by the human body and release the FIR field and the negative ions (and a small voltage as well which can excite the plasma) such that GANS field is acting deeper.
--------------------------------------------------------------------------------------------

Pure CO2 GANS capture device







.........................................................................................................

Magnesium GANS

9.70 PH Reading

.........................................................................................................

ZnO GaNs Reactor






Nanocoating the Zinc plate

1. Make two holes (3 mm in diameter) in two corners
2. Connect a piece of copper wire in one of the corners
3. Prepare a NaOH solution (caustic soda) in a sturdy plastic container and allow it to cool completely
4. Completely immerse the zinc plate in the cooled caustic soda solution and place a lid
5. Leave the zinc plate in the NaOH solution for a couple of hours
6. Take out the zinc plate and hang it over the caustic soda solution at about 10mm distance and place the lid over the plastic box
7. Leave the zinc plate suspended for about 24 hours
8. Repeat steps 4 to 7 several times
9. The zinc sheet will have a dark gray-blue color
10. Wash very well for a few times the nano-coated zinc plate under a cold water jet 

Note:
- Always use latex (or rubber) gloves when handling caustic soda, caustic soda solution and nano-coated plates !!!
- Use safety goggles to create and handle the caustic soda !!!





Using a power supply to make ZnO GaNs

⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀⇀






"
  







''


''

''

''

''

-----------------------------------------------------------------------------------------
- CO2 reactor -

Gives stronger CO2 gans and increased amount


- one copper plate (nanocoated - hot caustic)
- one pure zinc plate
 - one nanocoated zinc plate

There are used 4-5 types of sea salt (~10%)

The nano-copper-plate is located between zinc plates

(Under the tank are 3 aluminium plates to keep the fields into it)

--------------------------------------------------------------------------------------------


Niciun comentariu:

Trimiteți un comentariu